Buy Brand Bell Helmets Bell GTX3 Helmet - SA2020 / FIA8859, Model BEL1314A01 online. Driver Gear,Helmets
$799.95
SAVE 50%-80% OFF
$239.99
$0 today, followed by 3 monthly payments of $3, interest free. Read More
The Bell GTX.3 helmet features a lightweight carbon composite shell and sleek aero styling. The front chin bar gurney and integrated rear wing enhance aerodynamic performance at higher speeds. The integrated shield, double screen anti fog (DSAF) visor and rear facing vents allow air exchange and clear vision while preventing dust from entering the helmet (especially on dirt tracks or other demanding racing environments). The versatile GTX.3 provides industry-leading performance, professional features and is an ideal choice for racers competing in open wheel, open compartment, formula, karting and dirt tracks.
Product Line | GTX3 |
Open/Closed Face | Closed |
Fresh Air | No |
Vent System | Yes |
Snell Rating | SA 2020 |
FIA Approved | Yes |
Head and Neck Support Ready | Yes |
Shield Included | Yes |
Shield Color | Clear |
Visor Included | No |
Wicker Bill Included | Yes |
Graphics | No |
Bag Included | Yes |
Material | Carbon Composite |
Color | Gloss White or Matte Black |
Finish | Paint |
Quantity | Each |
Keywords | GTX 3, GTX-3, GTX.3, GTX3 |
Available Sizes and Colors
MPN | Size | Color |
1314A01 | 7-1/8 (57 cm) | Gloss White |
1314A02 | 7-1/4 (58 cm) | Gloss White |
1314A03 | 7-3/8 (59 cm) | Gloss White |
1314A04 | 7-1/2 (60 cm) | Gloss White |
1314A05 | 7-5/8 (61 cm) | Gloss White |
1314A06 | 7-5/8+ (61+ cm) | Gloss White |
1314A11 | 7-1/8 (57 cm) | Flat Black |
1314A12 | 7-1/4 (58 cm) | Flat Black |
1314A13 | 7-3/8 (59 cm) | Flat Black |
1314A14 | 7-1/2 (60 cm) | Flat Black |
1314A15 | 7-5/8 (61 cm) | Flat Black |
1314A16 | 7-5/8+ (61+ cm) | Flat Black |
Standard Size | Hat Size | Inches | Centimeters |
---|---|---|---|
4XS | 6 3/8 | 20 1/16 | 51 |
3XS | 6 1/2 - 6 5/8 | 20 1/2 - 20 7/8 | 52-53 |
2XS | 6 3/4 - 6 7/8 | 21 1/2 - 21 5/8 | 54-55 |
XS | 7 | 22 | 56 |
S | 7 1/8 | 22 3/8 | 57 |
M | 7 1/4 - 7 3/8 | 22 3/4 - 23 1/4 | 58-59 |
L | 7 1/2 | 23 5/8 | 60 |
XL | 7 5/8 - 7 3/4 | 24 - 24 3/8 | 61-62 |
2XL | 7 7/8 - 8 | 24 3/4 - 25 1/4 | 63-64 |
3XL | 8 1/8 - 8 1/4 | 25 5/8 - 26 | 65-66 |
4XL | 8 3/8 - 8 1/2 | 26 3/8 - 26 3/4 | 67-68 |
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement.