Buy Brand Bell Helmets Bell GTX3 Carbon Helmet - SA2020 / FIA8859, Model BEL1207A11 online. Driver Gear,Helmets
$1199.95
SAVE 50%-80% OFF
$359.99
$0 today, followed by 3 monthly payments of $3, interest free. Read More
The versatile GTX3 Carbon, used extensively on race tracks across North America, provides industry-leading performance and is a perfect choice for racers competing in open wheel forms of motorsports including formula, karting, and dirt track forms of racing. Featuring an ultra-lightweight carbon shell, integrated rear wing for enhanced aerodynamic performance at higher speeds, Venturi air-exchange system, and Double Screen Anti Fog (DSAF) shield, the GTX3 Carbon is ideal for serious drivers competing in challenging forms of racing.
Includes:
Product Line | GTX3 Carbon |
Open/Closed Face | Closed |
Fresh Air | No |
Vent System | Yes |
Snell Rating | SA 2020 |
FIA Approved | Yes |
Head and Neck Support Ready | Yes |
Shield Included | Yes |
Shield Color | Clear |
Visor Included | No |
Wicker Bill Included | Yes |
Graphics | No |
Bag Included | Yes |
Gloss/Flat | Gloss |
Material | Carbon Fiber |
Color | Natural |
Finish | Clearcoat |
Quantity | Each |
Standard Size | Hat Size | Inches | Centimeters |
---|---|---|---|
4XS | 6 3/8 | 20 1/16 | 51 |
3XS | 6 1/2 - 6 5/8 | 20 1/2 - 20 7/8 | 52-53 |
2XS | 6 3/4 - 6 7/8 | 21 1/2 - 21 5/8 | 54-55 |
XS | 7 | 22 | 56 |
Small | 7 1/8 | 22 3/8 | 57 |
Medium | 7 1/4 - 7 3/8 | 22 3/4 - 23 1/4 | 58-59 |
Large | 7 1/2 | 23 5/8 | 60 |
XL | 7 5/8 - 7 3/4 | 24 - 24 3/8 | 61-62 |
2XL | 7 7/8 - 8 | 24 3/4 - 25 1/4 | 63-64 |
3XL | 8 1/8 - 8 1/4 | 25 5/8 - 26 | 65-66 |
4XL | 8 3/8 - 8 1/2 | 26 3/8 - 26 3/4 | 67-68 |
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement.
Available Sizes
Part Number | Size |
1207A11 | 7-1/8- (57- cm) |
1207A12 | 7-1/8 (57 cm) |
1207A13 | 7-1/4 (58 cm) |
1207A14 | 7-3/8 (59 cm) |
1207A15 | 7-3/8+ 59+ cm) |
1207A16 | 7-1/2 (60 cm) |
1207A17 | 7-5/8 (61 cm) |
1207A18 | 7-5/8 Plus (61+ cm) |