Buy Brand Bell Helmets Bell GP3 Sport Helmet - SA2020, Model BEL1417A21 online. Driver Gear,Helmets
$699.95
SAVE 50%-80% OFF
$209.99
$0 today, followed by 3 monthly payments of $3, interest free. Read More
Bell's GP3 Sport combines traditional F1 styling with a lightweight carbon composite shell to create a high performing helmet for open wheel, formula racers and karters. Leading edge aerodynamic performance features excellent ventilation and a dual-screen anti-fog (DSAF) shield for clear vision in all condition.
Product Line | GP3 Sport |
Open/Closed Face | Closed |
Fresh Air | No |
Vent System | Yes |
Snell Rating | SA 2020 |
FIA Approved | Yes |
Head and Neck Support Ready | Yes |
Shield Included | Yes |
Shield Color | Clear |
Visor Included | No |
Wicker Bill Included | Yes |
Graphics | No |
Bag Included | Yes |
Material | Carbon Composite |
Color | Gloss White or Flat Black |
Finish | Paint |
Quantity | Each |
Available Sizes/Colors
MPN | Size | Color |
1417A21 | Small | Gloss White |
1417A22 | Medium | Gloss White |
1417A23 | Large | Gloss White |
1417A24 | XL | Gloss White |
1417A51 | Small | Flat Black |
1417A52 | Medium | Flat Black |
1417A53 | Large | Flat Black |
1417A54 | XL | Flat Black |
Standard Size | Hat Size | Inches | Centimeters |
---|---|---|---|
4XS | 6 3/8 | 20 1/16 | 51 |
3XS | 6 1/2 - 6 5/8 | 20 1/2 - 20 7/8 | 52-53 |
2XS | 6 3/4 - 6 7/8 | 21 1/2 - 21 5/8 | 54-55 |
XS | 7 | 22 | 56 |
S | 7 1/8 | 22 3/8 | 57 |
M | 7 1/4 - 7 3/8 | 22 3/4 - 23 1/4 | 58-59 |
L | 7 1/2 | 23 5/8 | 60 |
XL | 7 5/8 - 7 3/4 | 24 - 24 3/8 | 61-62 |
2XL | 7 7/8 - 8 | 24 3/4 - 25 1/4 | 63-64 |
3XL | 8 1/8 - 8 1/4 | 25 5/8 - 26 | 65-66 |
4XL | 8 3/8 - 8 1/2 | 26 3/8 - 26 3/4 | 67-68 |
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement.