Hobbywing QuicRun Combo 16BL30 - 2435SL 6500kV G3 1/16 1/18

Hobbywing QuicRun WP 16BL30 SL 1/16-1/18 ESC & 2435SL 6500KV G3 Combo - 2S LiPo

Easy Operation
This ESC is specially designed for new beginners and intermediate modelers; it not only carries forward the outstanding quality of HOBBYWING products but simplifies the operation.

Applicable to All Weather Conditions
The waterproof and dust-proof design allows the QUICRUN WP-16BL30 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.

High Reliability & Durability
Reliable hardware combined with advanced software technology allows the QUICRUN WP- 16BL30 to not only provide high power output but also overload protection of the ESC circuit.

Single-button Programming & Factory Reset
The SET button on the ESC allows the user to easily program or factory reset the ESC with ease.

Wide Application
This ESC is applicable to all-weather sport of 1/18th, 1/16th scale touring cars, buggies, trucks, and monster trucks.

ESC Specs:

• Type: 1/16, 1/18, Brushless, Sensorless, WP
• Cont./Peak Current: 30A/180A
• Input: 2-3S LiPo/6-9 Cells NiMH
• BEC: Linear Mode: 6V/1A
• Input Wires: 16AWG-75mm
• Output Wires: 16AWG-75mm
• Input Connectors: Small-sized TAMIYA Connector (Mini Tamiya)
• Output Connecotors: 3.5 Gold Connector (Female)

(Note: All the wire length above is the original length not the length you see from the outside.)

Programming:

• SET Button on ESC: Supported
• LED Program Box; Supported
• LCD Program Box: Not Supported
• WiFi Module: Not Supported
• OTA Programmer: Not Supported
• Program Port: Program/Throttle Wire
• Firmware Upgrade: Not Supported

Size & Weight:

• Size: 36x28x18mm
• Weight: 38g

Applications:

• Motors: Sensorless Brushless
• Vehicles: 1/16 & 1/18 - Touring Cars/Buggies/Trucks/Monster Trucks

Motor Limit:

For 2S Lipo or 6 cells NiMH:

• On-road: 2435-size or smaller motor with the KV<8000
• Off-road / Buggy / Monster: 2435-size or smaller motor with the KV<5000

For 3S Lipo or 9 cells NiMH:

• On-road: 2435-size or smaller motor with the KV<5500
• Off-road / Buggy / Monster: 2435-size or smaller motor with the KV<3500

QuickRun 2435SL G3 6500KV Brushless Sensorless 1/18-1/16 Motor:

Stronger power - Upgraded to 4-pole rotor
The G3 motor adopts a four-pole rotor design with stronger torque and stronger explosive power.

Better performance
Compared with the same specification of products under the same load conditions, the maximum output power is 60% higher, the maximum efficiency is 5% higher, and the temperature is reduced by approximately 30 degrees.

Upgraded materials, durable
0.2mm thick silicon steel, high-strength explosion-proof rotor, 200°C high-temperature-resistant enameled wire, and first-line brand high-precision and high-quality bearings make the motor durable.

Excellent protection
The output of the motor is sealed with a silicone rubber on the housing. It is dust-proof for off-road vehicles/trucks. Users will now enjoy bashing without having to worry in harsh operating environments such as outdoor sand, stones, and dust.
Note: It is recommended to block the unused mounting holes of the motor front cover with screws.

Motor Specs:

• Type: 1/18-1/16, Brushless, Sensorless Motor
• Poles: 4
• KV Rating: 6500
• LiPo Cells: 2S
• No-load Current: 3.4A
• O.D.: 24mm
• Length: 36mm
• Shaft Diameter: 2mm
• Connectors: 3.5mm (male)
• Weight: 61.2g
• Front Bearing: OD8xID3xT4mm
• Rear Bearing: OD8xID3xT4mm
• Applications: 1/16-1/18 On-road & Off-road