Buy Brand Bell Helmets Bell M8 Helmet - SA2020, Model BEL1419A11 online. Driver Gear,Helmets
$549.95
SAVE 50%-80% OFF
$164.99
$0 today, followed by 3 monthly payments of $3, interest free. Read More
The M8 is the next evolution in Bell’s legendary M series design, incorporating traditional Bell styling, a huge eyeport for enhanced visibility, and unrivaled versatility. The M8 provides outstanding comfort, performance features, and value. The lightweight composite shell, superior ventilation, and extended size range make the M8 a great choice for racers of all types who want a multi-purpose helmet with a wider field of vision (especially for those who wear glasses) that can be used in all forms of motorsports.
Product Line | M.8 Racer |
Fresh Air | No |
Vent System | Yes |
Snell Rating | SA 2020 |
Head and Neck Support Ready | Yes |
Shield Included | Yes |
Shield Color | Clear |
Visor Included | No |
Graphics | No |
Bag Included | Yes |
Material | Carbon Composite |
Color | Gloss White or Flat Black |
Finish | Paint |
Quantity | Each |
Sizes and Colors Available:
MPN | Size | Color |
1419A03 | Small | Gloss White |
1419A04 | Medium | Gloss White |
1419A05 | Large | Gloss White |
1419A06 | XL | Gloss White |
1419A07 | 2XL | Gloss White |
1419A08 | 3XL | Gloss White |
1419A09 | 4XL | Gloss White |
1419A12 | XS | Flat Black |
1419A13 | Small | Flat Black |
1419A14 | Medium | Flat Black |
1419A15 | Large | Flat Black |
1419A16 | XL | Flat Black |
1419A17 | 2XL | Flat Black |
1419A18 | 3XL | Flat Black |
1419A19 | 4XL | Flat Black |
Bell Size Chart
Size | Hat Size | Inches | Centimeters |
---|---|---|---|
4XS | 6 3/8 | 20 1/16 | 51 |
3XS | 6 1/2 - 6 5/8 | 20 1/2 - 20 7/8 | 52-53 |
2XS | 6 3/4 - 6 7/8 | 21 1/2 - 21 5/8 | 54-55 |
XS | 7 | 22 | 56 |
S | 7 1/8 | 22 3/8 | 57 |
M | 7 1/4 - 7 3/8 | 22 3/4 - 23 1/4 | 58-59 |
L | 7 1/2 | 23 5/8 | 60 |
XL | 7 5/8 - 7 3/4 | 24 - 24 3/8 | 61-62 |
2XL | 7 7/8 - 8 | 24 3/4 - 25 1/4 | 63-64 |
3XL | 8 1/8 - 8 1/4 | 25 5/8 - 26 | 65-66 |
4XL | 8 3/8 - 8 1/2 | 26 3/8 - 26 3/4 | 67-68 |
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement.